스페인 핸드메이드 초경량 파츠,

다리모 社의 엘립스 로드 초경량 카본 드롭바 입니다.



*필독사항
다리모 제품들은 모두 '초경량'에 포커스를 맞추기 때문에
타 브랜드 제품들에 비해 카본층이 많이 얇고 
그에 따라 내구성이 떨어지는 것이 사실 입니다.
(카본 강화 버젼으로도 제작 가능 / 체중제한과 제품 무게 증가 - 별도 문의)


라이더 체중제한은 자전거 포함 90kg이며, 
메뉴얼 적정토크를 반드시 준수하셔야 합니다.
또한 잦은 장착/탈착은 삼가해주시기 바랍니다.

사용중 발생한 파손은 본사 워런티 정책에 포함되어 있지 않으므로
위 사항들을 필히 참조해주시고, 더욱 더 각별한 주의와 신중한 구매 부탁드립니다.




*SPEC

Measures: Currently manufactured in widths of 360-380-400-420-440mm measured from center to center. With a “compact” shape it has 77mm reach and 128mm drop.

Triathlon extension: The central zone has a sufficient width for assembling extensions, but you must request an specifically reinforced versión.

Finishing: There are four possible finishes with the combination of gloss or matt, bidirectional (3k) or unidirectional. The Unidirectional version, only in the central part, has an increase in weight of about 8 grams.                    

Weight limit: The Darimo handlebar is safe and exceeds the tests of the ISO 4210-2 standard, so it is valid for an overall system weight (bicycle, cyclist, luggage) of maximum 110 kg. In case of riders weighting more than 90kg, we recommend a reinforced version for a stiffness increase.

Use: Road, gravel, CX

Di2 Version: On demand it’s possible to manufacture the handlebar with holes for the internal routing of electronic cables. In this case, it is necessary to specify where the holes are needed. It leads to an increase in weight depending on the number of holes since these areas must be reinforced.

We recomend to use stems with four screws up to 50 mm wide. If you have any doubt contact us.


Weight (+-3%):

440mm-132g

420mm-128g

400mm-124g

380mm-121g

360mm-118g















* 진 바이크에서 직접 수집하고 준비한 자료들 입니다.

무단 전재 및 배포는 삼가 주시기 바랍니다.